200W Outdoor LED Flood Lights
Aluminum Alloy Streamline In Flood Light Fixtures
High Luminous Efficiency Chips
High Quality Optical Lens
Stainless Steel Screw
Housed by aluminum alloy with perfect condensing reflector, Slim LED Flood Lights from 20W to 200W are normally used for outdoor landscaping areas such as tree lighting.Strong warm white or daylight with wide beam angle.Provide you the best flood lights portable.
200W Outdoor LED Flood Lights
1. High brightness, low power consumption,exterior led flood lights.
2. Strong anti-static ability,strong anti-decay ability, good color rendering, more realistic.
3. Surface electrostatic spray treatment,Corrosion resistance, not easy to scratch.
4. Smooth aluminum reflector, increase light refraction and more efficient use of light.
5. Stainless steel exposed screws, strong and durable face mask in flood lights led.
1. LED floodlights are lamps that have higher illuminance on the surface than the surrounding environment, that is, look up. Usually it can be aimed in any direction and has a structure that is not affected by climatic conditions. Meelamp's independent research and development of high-power LED floodlight housing has reached the IP66 protection level, which means that it can completely prevent dust and foreign objects and dust intrusion, in terms of waterproof and moisture: to prevent large invading, can be installed in On the ship's deck, damage caused by large waves can be prevented.
2. LED flood light is mainly used for large-area operation factories and mines, building outlines, stadiums, overpasses, monuments, parks and flower beds, etc. used for architectural decoration lighting, and commercial space lighting is used to create a good projection effect. The decorative ingredients are heavier and their appearance is round and square. SMD LEDs are mostly driven by low voltage and use aluminum substrates to dissipate heat. Therefore, most of their lamp housings use aluminum alloys because the specific gravity of aluminum alloy is 2.7, which is much lower than that of iron and copper, which means that the overall weight is light. The heat dissipation effect of aluminum alloy is good. The LED flood light housing designed by Meelamp has a large heat dissipation surface area and a reasonable heat dissipation structure. The overall heat dissipation of the lamp is good and the failure probability can be reduced, thus ensuring the design service life of the LED flood light. The internal and external anti-vibration structure design effectively solves the problems such as light bulb falling off due to strong vibration, shortened lamp life, and fracture of the bracket.
3. The exit beam angle of the Meelamp LED projector is a 130° symmetrical wide angle light distribution system. The use of high-purity aluminum reflector, beam accurate, best reflection. Replace the bulb for easy maintenance. The optical properties of the LED lead to glare problems, requiring a well-lit lampshade to form a surface light source to some extent. Nowadays, more matte processing or addition of some materials are used. With the development of these years, the light transmission performance has been further improved.
4. Current LED floodlights commonly used in the market basically use 1W high-power LEDs. Each LED element will have a high-efficiency lens made of PMMA. Its main function is to secondary distribute the light emitted by the LED. It is the second light. With highly efficient gas discharge lamps as light sources, the lamp has a long service life of more than 10,000 hours, which is particularly suitable for outdoor unattended lighting. With good electromagnetic compatibility, it will not cause electromagnetic interference to the surrounding environment.